It Acrylic Polymer Waterproof Roofing Coating,which is made up by acrylate emulsion, cement powder and inorganic materials, different standards are available according to their different performance.
Free of pollution, non-toxic, environment friendly.
Ready to use, it is suitable for engineering and home waterproofing.
Good adhesion, it can be applied on wet or dry substrate.
Good water resistance and tensile property, high elasticity and low temperature flexibility.
Environment friendly: The Technical Requirement for Environmental Labeling Products
Where to use
Exposed and non exposed buiding roof
Indoor and outdoor waterproofing
Waterproofing maintenance for roof
Waterproofing maintenance for metal roofing and heat insulation
How to use
Substrate requirement: the substrate shall be solid, smooth, no water and no grease.
Multi-layer application: apply evenly on the substrate by roller or scraper to cover the substrate completely and level the coating. Irregular part can be applied with small brush. Apply the second layer with vertical direction after the first one becomes dry.
Substrate application: apply one layer again with coating diluted with water so as to improve the effect of smooth.
Facade coating: sprinkle some sands which grain diameter is about 2 mm on the surface before the last coating is dry, so as to strengthen the bonding force between the coating and the protective layer.
Protective layer application: apply as designed requirement after passing the acceptance inspection.
tensile strength Mpa ≥
elongation at break ≥
low temperature flexible/℃
-10℃, no gash
-20℃, no gash
imperviousness 0.3Mpa, 30 min
solids content % ≥
Tack free time
Full curing time
After full cure it is recommended that a flood test be carried out prior to covering. Minimum depth of 50 mm of water for 24 hours for testing will be fine. Drains should be plugged and barriers placed to contain the water.
Clean brushes and tools in water while still wet, avoid spillage.
Stored in in an sealing and unopened container in a cool (below 20°), dry environment and stored above ground level, this product will have a shelf life of approximately 12 months
1) The application temperature shall be over 5℃, can not be applied when it rains or snows.
2) When water, ash or surface dusting exit on the substrate, dispose them before applying the waterproofing layer.
3)Apply the protective and decorative layer 3-5 days after the coating becomes dry.
4)Keep ventilation when working indoors so that the coating can dry well.