Capable — Top 5 manufacturer in China! Biggest factory in Asia!
Professional — 10 years' experience in export!
Eternal — Stable quality and price!
Supportable — Overseas technical support and return visit after the sale!
Phone & Whatsapp:+8613923296933
Maydos fire brick spray adhesive fire resistant glue for foam mattress
Maydos Spray Adhesive formulated with good-quality raw materials and conforming to national compulsory standard-GB18583-2001 requirements of restriction of harmful and hazardous substance, possesses such features as low VOC, fresh smell, high solid content, good flexibility, easy application, strong adhesive force, environment-friendly etc. And after hardening, it can be resistant to damp, water, heat, acid, alkali and bumping, so it is widely used for bonding sponge, heat-insulated materials, fiber, wood and thin metal sheet.
Features and benefits
1.Environmental: benzene free, no hazardous materials and additives and low VOC.
2.Best bonding effect can be achieved even under temperature around 60°C.
3.Fast drying speed and long viscosity-keeping time.
4.Strong bonding strength and good initial bonding power; water-proof and ageing resistant.
5.Easy application. It is easy to apply the adhesive evenly on the bonding surface and no adhesive legging occurs.
It is suitable for bonding different materials such as sponge, heat-insulated materials, fiber, wood and thin metal sheet.
light yellow viscous liquid
90±40 mPa. S/25°C
30 minutes ≥ 0.6 mpa
48 hours ≥ 1.0 mpa
≤ 200 g/L
Initial bonding power
The product can be applied by Brush or spray gun
Theoretical coverage: 185-250 g/m2
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly.
Average dry time at 77°F/25°C: 5 - 15 minutes
Directions for use
The grease, dust, moisture, rust on the bonding surface must be cleaned off.
Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
Recommended apply system
Apply the adhesive evenly on the two bonding surfaces with spray gun and the consumption is 185-250g/m2. Spray gun with an opening of 2.0-2.5 mm and 0.3-0.5 Mpa air pressure is recommended.
the adhesive should be applied evenly and not too thick to avoid the weakening of the bonding strength. But for porous materials or materials with coarse surface, you can apply more accordingly.
After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or stickiness. The airing time is about 5-15 minutes/25C and varies from the temperature, humidity and adhesive film. The bonding can be done after the surface is dry by touch. For porous materials, you can bond directly after application of the adhesive.
The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t move the bonding surfaces back and forth, or the bonding effect will be affected.
1.Seal it tightly and store it in a cool and well-ventilated place where the temperature is between 5C -35C and the relative humidity is ≤80%. Don’t expose it under the sun.
2.Volatile solvent contained. Do not swallow. Keep it far away from open fire because of volatile solvent in it which is inflammable and out of reach of the children. The room should be well-ventilated during application.
3.No. of Regulation On Transporting Dangerous Goods: 32196
All Kinds of Purposes
Why Choose us?
1.One of the top 5 Chemical Company in China.
2.Rich experience in Transport of Chemical liquid goods.
3.Response timely with professional workable advise.
4.Wide range of chemical product provided,your best one-step purchase choice.